Table of Contents
Advertisement
To fix this error, repeat the steps from accessing the BIOS to save changes and exit, and then
run the update again.
•
A screen showing that the BIOS update was successful. The following is a sample screen:
12. Power down the gateway on page 10 for the changes to take effect.
All BIOS options are restored to the default values and the Management Engine password is set back to
the default password.
The Build Date now appears updated to 06/13/2017 on the BIOS Main tab. The ME FW version is now
9.5.61.3012.
Using the system BIOS to configure gateway and troubleshoot issues
The gateway can be set up and configured through the system BIOS. The system BIOS also has options
for restoring default configurations and resetting the system. The setup information is stored in the
battery-backed CMOS, therefore it retains the setup information even when the power is turned off.
34
Using the system BIOS to configure gateway and troubleshoot issues
Hide quick links:
Advertisement
Table of Contents
