Table of Contents
Advertisement
•
Software Preserve
•
Port #—Enables or disables the SATA port
•
Hot Plug—Enables or disables the hot plug
•
External SATA—Enables or disables the external SATA
•
SATA Device type—Enables user to select the mode of SATA device type
Intel(R) Rapid Start Technology
Intel(R) Rapid Start Technology—Enables or disables Rapid Start Technology, if supported
PCH-FW Configuration
The ME technology parameters are displayed, including:
•
ME Firmware Version—Displays the current firmware version
•
ME Firmware Mode—Displays the current firmware mode
•
ME Firmware Type—Displays the current firmware type
•
ME Firmware SKU—Displays the current firmware SKU
•
PTT Capability/State—Displays the PTT capability and state
•
Firmware Update Configuration—Enables or disables ME firmware image re-flash function
USB Configuration
The USB configuration and device options are displayed, including:
•
Legacy USB Support—Enables user to set support for legacy USB. Auto option disables legacy
support if no USB devices are connected.
•
USB 3.0 Support—Enables or disables USB 3.0 support
•
XHCI Hand-Off—Offers user a workaround for the OS without XHCI hand-off support. The XHCI
ownership change should be claimed by the XHCI driver.
•
EHCI Hand-Off—Offers user a workaround for the OS without EHCI hand-off support. The EHCI
ownership change should be claimed by the EHCI driver.
•
USB Mass Storage Driver Support—Enables or disables mass storage support
•
USB transfer time-out—Enables user to set the time-out value for control, bulk, and interrupt
transfers
•
Device reset time-out—Enables user to set the USB mass storage device start unit command time-
out value
•
Device power-up delay—Enables user to set the maximum time the device will take before it properly
reports itself to the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms: for a Hub
port the delay is taken from Hub descriptor.
Embedded Controller Configuration
The EC firmware version and general functions are displayed, including:
•
EC Power Saving Mode—Enables user to set the EC power saving mode
•
EC Watchdog Function—Enables user to set the EC watchdog timer
IT8768 Super IO Configuration
The Super Chip configuration details are displayed, including:
•
Serial Port 1 Configuration—Enables user to configure serial port 1
•
Serial Port 2 Configuration—Enables user to configure serial port 2
Serial Port Console Redirection
The COM1 settings and console redirection settings are displayed, including:
Intel(R) Rapid Start Technology
39
Hide quick links:
Advertisement
Table of Contents
