Table of Contents
Advertisement
f.
Remove the wireless antenna cables and transceivers (4).
The wireless antenna cables and transceivers are available using spare part number 924307-001.
Reverse this procedure to reassemble and install the display assembly.
Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
b.
System board (see
c.
Speakers (see
d.
Display assembly (see
Remove the power connector cable:
▲
Remove the power connector cable.
Bottom cover on page
Battery on page
32)
System board on page
Speakers on page
51)
Display assembly on page
30), and then remove the following components:
41)
53)
Component replacement procedures
Spare part number
933523-001
61
Hide quick links:
Advertisement
Table of Contents
