Table of Contents
Advertisement
Replacing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Easel stand
1
Insert the tabs on the stand bracket into the slots on the back cover.
2
Align the screw holes on the stand with the screw holes on the back
cover.
3
Replace the screws that secure the stand to the back cover.
4
Replace the stand cover.
Pedestal stand
1
Insert the tabs on the stand bracket into the slots on the back cover.
2
Align the screw holes on the stand with the screw holes on the back
cover.
3
Replace the screws that secure the stand bracket to the back cover.
4
Replace the stand cover.
Procedure to replace stand riser to stand base
1
Slide the stand base into the slot on the stand riser.
2
Tighten the captive thumbscrew and fold the screw handle on the stand
base.
22
computer. After working inside your
After working inside your
Advertisement
Table of Contents
