Remove The Access Panel; Removing The Pcie Access Panel; Removing The Pxie Access Panel - HPE Edgeline EL4000 User Manual

• Rack-mounting kit
• Wall-mounting kit
The wall-mounting kit is non HPE and allows up to two Edgeline EL4000 systems to be installed on a
wall. For more details, contact RackSolutions
101-5302.

Remove the access panel

Depending on the configuration of your system, perform one of the following procedures:
• Removing the PCIe access panel on page 20
• Removing the PXIe access panel on page 20

Removing the PCIe access panel

Procedure
1. Using a Torx screwdriver, turn the T-15 locking Torx screw a quarter turn to unlock the latch.
2. Press the latch button and open the latch.
3. Remove the access panel.

Removing the PXIe access panel

Procedure
1. Press the latch button and open the latch.
2. Slide the panel to the rear of the chassis.
3. Lift and remove the access panel.
20 Remove the access panel
®
at http://www.racksolutions and request P/N