Front Panel Leds And Buttons - HPE Edgeline EL4000 User Manual

Item
8
9

Front panel LEDs and buttons

1
Item Description
1 USB 2.0 port
2 Cartridge power LED/
button
3 Cartridge health LED
4 Cartridge UID LED
5 Management reset pin hole
1
button
6 Chassis system health LED Green = Normal operation
1
The reset button is indented and you might need a tool, such as a pin, to press it.
10 Front panel LEDs and buttons
2 3 4
Status
Connects a USB 2.0 device to the cartridge
Green = Normal operation
Amber = Standby operation
Off = No power or no cartridge installed
Green = Normal operation
Flashing Amber = Degraded condition
Flashing Red = Critical condition
Off = No power or no cartridge installed
Blue = Cartridge ID is selected.
Flashing Blue = Cartridge firmware update is in progress or iLO
IRC is in use.
Off = Cartridge ID is not selected.
Pressing the reset button resets the chassis controller. iLO
remains operational.
Flashing Amber = Degraded condition
Off = No power
Description
Cartridge 3
Cartridge 4
5 6