Wired Network Setup - Brother MFC-L8610CDW User Manual

Home > Machine Settings
Tables > Feature Tables (MFC-L8900CDW)
Feature Tables (MFC-L8900CDW)
Related Models: MFC-L8900CDW

(Wired Network Setup)

Level 3 Descriptions
TCP/IP Change the TCP/IP settings.
Ethernet Select the Ethernet link mode.
Wired Status
View the current wired status.
MAC Address View the machine's MAC address.
Set to Default Restore the wired network settings to the factory settings.
Wired Enable Turn the Wired LAN on or off manually.
®
(Wi-Fi Setup)
For wireless network models
Level 3
TCP/IP
1
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code
1
WLAN Status
1
MAC Address
1
Set to Default
1
WLAN Enable
1
1
Available after the Wi-Fi
[Toner]
Level 3 Level 4
Toner Life -
Test Print -
Calibration Calibrate Initiate color calibration to check and correct colors.
Reset
Registration -
> Change Machine Settings from the Control Panel
Descriptions
Change the TCP/IP settings.
Configure the wireless network settings using the setup wizard.
Configure your wireless network settings using the Brother installation disc.
Configure your wireless network settings using the one-button push method.
Configure the wireless network settings using WPS with a PIN code.
Display the wireless network connection status.
Display the MAC address of the machine.
Restore wireless network settings of your machine to the factory settings.
Turn the wireless interface on or off.
®
is set up
Descriptions
View the approximate remaining toner life for each color.
Print a test page.
Reset the calibration parameters to the default settings.
Align the print position of each color.
> Settings and Features
715