Configure Your Machine For A Wireless Network When The Ssid Is Not Broadcast - Brother MFC-L8610CDW User Manual
Hide thumbs
Also See for MFC-L8610CDW:
- Quick start manual (5 pages) ,
- Product safety manual (22 pages) ,
- Reference manual (20 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
> Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Communication Mode
Infrastructure
For example:
Network Name (SSID)
HELLO
Communication Mode
Infrastructure
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press
[Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
If your machine displays the [All Settings] menu on the Home screen, skip the [Settings] menu.
3. When [Enable WLAN?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. Swipe up or down or press a
or b to display [<New SSID>]. Press [<New SSID>], and then press [OK].
5. Enter the SSID name, and then press [OK].
6. Press [Infrastructure] when instructed.
7. Select the Authentication Method.
8. Do one of the following:
•
If you selected the [Open System] option, press the Encryption type [None] or [WEP].
If you selected the [WEP] option for Encryption type, select and enter the WEP key, and then press [OK].
•
If you selected the [Shared Key] option, select and enter the WEP key, and then press [OK].
•
If you selected the [WPA/WPA2-PSK] option, press the Encryption type [TKIP+AES] or [AES].
Enter the WPA key, and then press [OK].
•
Your Brother machine supports the use of the first WEP key only.
9. The machine attempts to connect to the wireless device you have selected.
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK
Authentication Method
WPA2-PSK
Encryption Mode
NONE
WEP
WEP
AES
TKIP
Encryption Mode
AES
Network Key
-
Network Key
12345678
329
Advertisement
Table of Contents
