®
•
Windows
10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
•
To use a Windows
your network in advance. For more information, see the instructions supplied with your wireless LAN
access point/router.
•
If you use Windows
after the wireless configuration by following the on-screen instructions. To install the full driver and
software package, use the Brother installation disc.
7. Select your machine and click Next.
8. Type the PIN displayed on the machine's LCD, and then click Next.
®
9. (Windows
7) Select your network, and then click Next.
10. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother installation disc into your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com.
Related Information
•
Additional Methods of Configuring Your Brother Machine for a Wireless Network
•
Wireless LAN Report Error Codes
®
®
7, Windows
8, or Windows
®
®
7, Windows
8, or Windows
®
10 computer as a Registrar, you must register it to
®
10 as a Registrar, you can install the printer driver
326