Brother MFC-L8610CDW User Manual page 700

Level 3
Wi-Fi Direct
E-mail/IFAX
(Available after
Internet Fax (I-Fax) is
downloaded)
Level 4 Level 5
Device
Information
IP Address
Status Status
Information
Signal
I/F Enable -
Mail Address -
Setup Server SMTP
POP3/IMAP4
Setup Mail RX Auto Polling
Header
Level 6 Descriptions
When the machine is not
connected, the LCD displays Not
Connected.
- View your machine's current IP
Address.
- View the current Wi-Fi Direct
network status.
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
- Turn the Wi-Fi Direct connection
on or off.
- Enter the email address.
Server Enter the SMTP server name and
address.
Port Enter the SMTP port number.
Auth. for Select the Security method for
SMTP email notification.
SSL/TLS Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify Verify the SMTP Server Certificate
Cert. automatically.
Protocol Select the protocol for receiving an
email from the server.
Server Enter the server name and
address.
Port Enter the port number.
Mailbox Enter the mailbox name.
Name
(Up to 60 characters)
Mailbox Enter the password to login to the
Password server.
(Up to 32 characters)
Select Select the specified folder in the
Folder mailbox using the IMAP4 protocol.
SSL/TLS Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify Verify the SMTP Server Certificate
Cert. automatically.
APOP Turn APOP on or off.
Auto Check the server for new
Polling messages automatically.
Poll Set the interval for checking new
Frequency messages on the server.
- Select the contents of the email
header to be printed.
693