Other Problems - Brother MFC-L8610CDW User Manual

Home > Troubleshooting

Other Problems

Difficulties
The machine will not turn on.
The machine cannot print EPS data that includes binary
with the BR-Script3 printer driver.
The Brother software cannot be installed.
> Other Problems
Suggestions
Adverse conditions on the power connection (such as
lightning or a power surge) may have triggered the
machine's internal safety mechanisms. Unplug the power
cord. Wait for ten minutes, then plug in the power cord
and press to turn on the machine.
If the problem is not solved, press and hold
the machine. If you are using a backup battery or surge
suppressor device, disconnect it to make sure it is not the
problem. Plug the machine's power cord directly into a
different known working wall outlet and press
on the machine.
®
(Windows )
To print EPS data, do the following:
®
1. For Windows 7 and Windows Server
Click the Start button > Devices and Printers.
®
For Windows Server
Click the (Start) button > Control Panel >
Hardware and Sound > Printers.
®
For Windows 8 and Windows Server
Move your mouse to the lower right corner of your
desktop. When the menu bar appears, click Settings
> Control Panel. In the Hardware and Sound
group, click View devices and printers.
®
For Windows 10 and Windows Server
Click > Windows System > Control Panel. In
the Hardware and Sound group, click View devices
and printers.
®
For Windows Server
Click Control Panel on the Start screen. In the
Hardware group, click View devices and printers.
2. Right-click the Brother XXX-XXXX BR-Script3 icon,
select Printer properties.
3. From the Device Settings tab, choose TBCP (Tagged
binary communication protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB
interface, you cannot print EPS data that includes binary.
You can print the EPS data at the machine through a
network. For help installing the BR-Script3 printer driver
through the network, go to the Brother Solutions Center at
support.brother.com.
®
(Windows )
If the Security Software warning appears on the computer
screen during the installation, change the Security
Software settings to permit the Brother product setup
program or other program to run.
(Macintosh)
to turn off
®
2008 R2:
2008:
®
2012:
®
2016:
2012 R2:
to turn
1
613