Page 1
Replace the Drum Unit | Brother http://support.brother.com/g/b/faqendbranchprintable.aspx?c=us&lang=... Print Close MFC-L8610CDW FAQs & Troubleshooting Replace the Drum Unit ● ● ● ● ● Before starting the replacement procedure, see Related Information: Replace Supplies. Make sure the machine is turned on. ● ● ● ●...
Page 2
Replace the Drum Unit | Brother http://support.brother.com/g/b/faqendbranchprintable.aspx?c=us&lang=... IMPORTANT Hold the green handles of the drum unit when you carry it. DO NOT hold the sides of the drum unit. Unpack the new drum unit. Remove the protective cover. Hold the handle of the toner cartridge and gently push it away from you to unlock it. Pull it up and out of the drum unit.
Page 3
Replace the Drum Unit | Brother http://support.brother.com/g/b/faqendbranchprintable.aspx?c=us&lang=... BK: Black C: Cyan M: Magenta Y: Yellow Make sure you put the toner cartridge in correctly or it may separate from the drum unit. Make sure the green lock lever (1) is in the release position, as shown in the illustration.
Page 4
Replace the Drum Unit | Brother http://support.brother.com/g/b/faqendbranchprintable.aspx?c=us&lang=... Using the green handle, push the drum unit back into the machine until it locks in place. Close the machine's front cover. After installing the new drum unit, you must reset the drum counter. See Related Information: Reset the Drum Counter.