Brother MFC-L8610CDW User Manual page 387

Home > Network > Advanced Network Features
Based Management > Configure the SNTP Protocol Using Web Based Management
Configure the SNTP Protocol Using Web Based Management
Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by
the SNTP time server.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Network tab.
5. Click the Protocol menu in the left navigation bar.
6. Select the SNTP check box to activate the settings.
7. Click Submit.
8. Restart your Brother machine to activate the configuration.
9. Next to the SNTP check box, click Advanced Settings and follow the instructions below:
Option
Status
Synchronization Status
SNTP Server Method
> Synchronize Time with the SNTP Server Using Web
Description
Displays whether the SNTP protocol is enabled or disabled.
Confirm the latest synchronization status.
Select AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will obtain
the address from that server automatically.
• STATIC
Type the address you want to use.
.
380