Brother MFC-L8610CDW User Manual page 698

Level 3 Level 4
Color Color Settings
Correction
[All Settings] > [Network]
Level 3
Wired LAN
WLAN
Level 5
Red
Green
Blue
Level 4 Level 5
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
Ethernet -
Wired Status -
MAC Address -
Set to -
Default
Wired Enable -
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
Descriptions
Adjust the red color.
Adjust the green color.
Adjust the blue color.
Level 6 Descriptions
IP Boot Select the BOOT method that best
Tries suits your needs.
- Enter the IP address.
- Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
(up to 32 characters)
- Select the WINS configuration
mode.
Primary Specify the IP address of the
primary WINS server.
Secondary Specify the IP address of the
secondary WINS server.
Primary
Specify the IP address of the
primary DNS server.
Secondary Specify the IP address of the
secondary DNS server.
- Set the machine to allocate the IP
address from the link-local address
range automatically.
- Turn the IPv6 protocol on or off. To
use the IPv6 protocol, go to the
Brother Solutions Center at
support.brother.com
information.
- Select the Ethernet link mode.
- View the current wired status.
- View the machine's MAC address.
- Restore the wired network settings
to the factory settings.
- Turn the Wired LAN on or off
manually.
IP Boot Select the BOOT method that best
Tries suits your needs.
- Enter the IP address.
- Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
(up to 32 characters)
- Select the WINS configuration
mode.
for more
691