Table of Contents
Advertisement
– Once the bulb holder has been removed, press downwards in
the direction of the arrow
direction of the arrow
2
Changing bulbs. LED lamps
Carry out the same operations as in lights fitted with bulbs.
If necessary, remove the socket, as if it were a bulb.
If the brake light and/or side light with LEDs have to be replaced, the tail
light must be replaced.
Side turn signal bulbs
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
Safety First
and at the same time, turn in the
1
⇒ F ig.
164.
Fig. 165 Side turn sig-
nals
Operating Instructions
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
⇒ F ig.
the tabs
165, and then fit in the bulb as shown by the
1
⇒ F ig.
arrow
165.
2
Number plate light
– Insert the flat part of a screwdriver into the special slot and re-
move the bulb.
– Remove the bulb holder, by turning it until it is free.
– Change the bulb.
– Replace the bulb holder, by turning it until it fits fully.
– Fit the light into the space and press until you hear a "click".
Practical Tips
If and when
239
Technical Specifications
Advertisement
Table of Contents
