Table of Contents
Advertisement
Setting speed*
– Press the lower part SET of the rocker switch
briefly when you have reached the speed you wish to set.
When you release the rocker switch, the current speed is set and held con-
stant.
Safety First
Fig. 112 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ F ig. 112
once
B
Operating Instructions
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.
Setting a higher speed
– Press the upper part RES of the rocker switch
increase the speed. The vehicle will continue to accelerate as
long as you keep the rocker switch pressed. When you release
the switch, the new speed is stored.
Setting a lower speed
– Press the lower part SET– of the rocker switch
speed. The vehicle will automatically reduce its speed for as
long as you keep the switch pressed. When you release the
switch, the new speed is stored.
When you increase speed with the accelerator and then release the pedal,
the system will automatically restore the set speed. This will not be the
case, however, if the vehicle speed is more than 10 km/h (mph) higher than
Practical Tips
Driving
159
Fig. 113 Turn signal and
main beam headlight lev-
er: switch and rocker
switch for the cruise con-
trol
⇒ F ig. 113
to
B
to reduce the
B
Technical Specifications
Advertisement
Table of Contents
