Table of Contents
Advertisement
Changing the rear wiper blade
A good rear wiper blade is essential for clear rear vision.
Damaged wiper blades should be replaced immediately.
Safety First
Fig. 130 Removing the
rear window wiper blade
Fig. 131 Fitting the rear
window wiper blade
Operating Instructions
Removing the wiper blade
– Lift the wiper arm away from the glass
– Slide the blade adapter in the direction of the arrow and remove
⇒ F ig.
the blade
130.
Fitting the wiper blade
– With one hand, hold the top end of the wiper arm.
– Place the blade as shown in the
er along until it engages.
Check the condition of the wiper blade regularly. Change as required.
If the windscreen wiper scrapes, it should be replaced if damaged, or
cleaned if soiled.
If this is not sufficient, refer to a specialised workshop.
WARNING
Do not drive unless you have good visibility through all windows!
● Clean the windscreen wiper blades and all windows regularly.
● The wiper blades should be changed once or twice a year.
CAUTION
● A damaged or dirty window wiper could scratch the rear window.
● Never use fuel, nail varnish remover, paint thinner or similar products to
clean the window.
● Never move the windscreen wiper by hand. This could cause damage.
Practical Tips
Checking and refilling levels
⇒ F ig.
130.
⇒ F ig. 131
and slide the adapt-
Technical Specifications
205
Advertisement
Table of Contents
