Table of Contents
Advertisement
230
If and when
Dipped/main beam headlights
– Raise the bonnet.
⇒ F ig. 144
– Move the loop
remove the cover.
Fig. 144 Dipped beam/
main beam, single head-
light
Fig. 145 Dipped beam/
main beam, single head-
light
in the direction of the arrow and
1
⇒ F ig. 145
– Remove connector
2
⇒ F ig. 145
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Side light
– Raise the bonnet.
from the bulb.
pressing inwards to the
3
Fig. 146 Side lights
Advertisement
Table of Contents
