Table of Contents
Advertisement
WARNING
For your safety, the windows should never be fogged up or covered with
snow or ice. This is essential to ensure good visibility. Please familiarise
yourself with the correct operation of the heating and ventilation system,
including the demist/defrost functions for the windows.
Note
Please consider the general notes.
Vehicle interior heating or cooling system
Interior heating
– Disconnect the cooling system using button
button light turns off).
– Turn the temperature selector
inside the vehicle.
Safety First
Fig. 94 Air conditioning
controls on the dash pan-
el
⇒ F ig. 94
(the
AC
to set the desired temperature
A
Operating Instructions
– Turn the blower switch to any of the settings 1-4.
– Set the air distribution control
desired:
(towards the windscreen),
(towards the footwell) and
footwell areas).
Interior cooling
– Connect the cooling system with button
should light up).
– Turn the temperature control switch until the desired interior
temperature is reached.
– Turn the blower switch to any of the settings 1-4.
– Set the air distribution control to the air flow configuration de-
sired:
(towards the windscreen),
(towards the footwell) and
footwell areas).
Heating
Maximum heat output, which is needed to defrost the windows quickly, is
only available when the engine has reached its operating temperature.
Coolant system
When the air conditioning is switched on, the temperature and the air hu-
midity go down. This way, if the outside humidity is extreme, the air condi-
tioning prevents the misting of the windows and therefore, comfort is im-
proved.
If the air conditioning does not work, this may be due to the following rea-
sons:
● The engine is stationary.
● The fan blower is switched off.
Practical Tips
Air conditioning
to the air flow configuration
C
(towards the chest),
(towards the windscreen and
(the button light
AC
(towards the chest),
(towards the windscreen and
Technical Specifications
131
Advertisement
Table of Contents
