Table of Contents
Advertisement
Dipped beam headlights
– Raise the bonnet.
⇒ F ig. 152
– Move the loop
remove the cover.
Safety First
Fig. 152 Dipped beam
headlights
Fig. 153 Dipped beam
headlights
in the direction of the arrow and
1
Operating Instructions
⇒ F ig. 153
– Remove connector
⇒ F ig. 153
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Turn signal lights
– Raise the bonnet.
⇒ F ig. 154
– Turn bulb holder
A
Practical Tips
If and when
from the bulb.
2
pressing inwards to the
3
Fig. 154 Turn signal
to the left and pull.
Technical Specifications
233
Advertisement
Table of Contents
