Data Recording Mode - Triumph Speed Triple S Owner's Handbook Manual

Turning the Lap Timer On or Off
To switch the lap timer on or off, with
the motorcycle stationary and in neutral
turn the ignition to the ON position.
Press button 'A' on the left handlebar
switch housing until LAP is shown.
Press and release button 'A' until SEtUP
is shown in the display screen. Then
press button 'B'.
Press and release button 'A' until LAP is
shown then press button 'B'. ON or OFF
will flash in the display screen.
Press button 'A' to select either ON or
OFF then press button 'B'. Do not touch
buttons 'A' or 'B' until LAP is shown in
the display. Then press and release
button 'A' until REtURn is shown then
press button 'B'.
SEtUP is shown in the display screen.
Press button 'A' until REtURn is shown
and then press button 'B'.
General Information

Data Recording Mode

1
4
5 3
1. Lap number
2. Stop watch icon
3. Lap timer
4. Button A
5. Button B
Note:
• The data recording mode and the
data retrieval mode will only operate
when the lap timer (LAP) is turned
on.
To select the data recording mode, turn
the ignition to the ON position.
Press and release the SCROLL button
until LAP is shown in the screen then
press the SCROLL button for more than
one second. L01 and a stop watch icon
will be shown in the speedometer
display, and the lap timer will be shown
in the display screen.
Pressing the SCROLL button (with the
engine running only) will start the lap
timer. The display will show the lap time
in minutes, seconds and hundredths of a
second, and the stop watch icon is on.
2
47