Data Recording Mode - Triumph Daytona 675 Handbook

General Information
Maximum Speed
The maximum speed achieved per lap (the
lap number will be displayed in the
speedometer display position)
maximum speed achieved
recorded laps.
Average Speed
The average speed per lap (the lap number
will be displayed in the speedometer display
position) or the average speed during all
recorded laps.
Distance Travelled
The distance travelled per lap (the lap
number will be displayed in the speedometer
display position) or the distance travelled for
all recorded laps.
The lap timer has two modes; Data
Recording Mode and Data Retrieval Mode.
Warning
Do not attempt to switch between lap
timer display modes with the motorcycle in
motion as this may lead to loss of
motorcycle control and an accident.
28

Data Recording Mode

or the
during all
1. Lap time display (during a lap)
2. Stop watch icon
3. Scroll button
After pressing the 'Scroll' button to select the
lap timer, the word 'LAP' will appear in the
clock display.
Pressing the starter button (with the engine
running only) will start the lap timer. The
display will show the lap time in minutes,
seconds and tenths of a second, and the stop
watch icon will flash.
At the end of the lap, pressing the starter
button again will register the start of a new
lap. The display will show the last lap time for
15 seconds. After this time, the display will
show the current lap number for 5 seconds
before returning to the time for the current
lap.
4
2
0
2
1
3