Headlight Adjustment - Vertical; Headlight Bulb Replacement - Triumph Speed Triple S Owner's Handbook Manual

Headlight Adjustment - Vertical

1
L0037
1. Bolts
2. Front subframe alignment marks
3. Headlight bracket
The vertical beams of the left and right
hand headlights can only be adjusted
together. Independent adjustment is not
possible.
Switch the headlight dipped beam on.
Slacken the two bolts securing the
headlight bracket to the front subframe
sufficiently to allow restricted movement
of the headlights.
Using the headlight bracket mark and
the alignment markings on the front
subframe, adjust the position of the
headlights to give the required beam
setting. Each mark on the subframe
represents 1°.
Moving the bracket forwards moves the
headlight downwards.
bracket rearwards moves the headlights
upwards.
Tighten the headlight bracket bolts to
7 Nm.
Recheck the headlight beam settings.
Switch the headlights off when the beam
settings are satisfactorily set.
Maintenance and Adjustment

Headlight Bulb Replacement

2
The bulbs become hot during use.
3
Always allow sufficient time for the
bulbs to cool before handling.
Avoid touching the glass part of the
bulb. If the glass is touched or gets
dirty, clean with alcohol before re-use.
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a
headlight bulb as specified in the
Triumph Parts Catalogue.
Always have replacement headlight
bulbs
Triumph dealer.
Release the three fixings and remove
the front panel from the fuel tank.
1
Moving the
2
cg
1. Front panel
2. Fixings
Disconnect the battery, negative (black)
lead first.
Warning
Caution
genuine Triumph supplied
installed by an authorised
2
2
129