Service Interval Announcement (Sia) - Triumph Speed Triple S Owner's Handbook Manual

General Information
Models without TPMS: Press button 'B'
and do not touch buttons 'A' or 'B' again
until UnitS is shown in the display
screen. When UnitS is shown in the
display screen, press
button 'A' until REtURn is shown then
press button 'B'. Trip will be shown in the
display screen.
Models with TPMS: Press button 'B' and
do not touch buttons 'A' or 'B' again until
PSI or bAr is displayed. Press and
release button 'A' until the desired tyre
pressure units are shown.
Press button 'B' and wait until UnitS is
displayed, then press button 'A' and
when REtURn is displayed
button 'B'. Trip will be shown in the
display screen.
Return
Select REtURn to return to the main
display.
32
Service Interval
Announcement (SIA)
The Service Interval Announcement (SIA)
shows the total distance that the
and release
motorcycle has remaining before a
service is required. If the service is
overdue, the distance will be displayed
as a negative number.
press
1. Service indicator
2. Remaining distance
When the ignition is switched on and the
distance to the next service is 500 miles
(800 km) or less, the service symbol will
be displayed for three seconds and the
clock will show the distance remaining
before the next service.
When the remaining distance is 0 miles
(0 km) the service symbol will remain on
until the service has been carried out
and the system has been reset by your
authorised Triumph dealer.
1
2