Adjusting The Back Angle; Folding The Back Down - SORG MIO MOVE User Manual

Mio Move

3.4.2 Adjusting the back angle

To adjust the back angle:
• (1+2) turn the lever (A) to the right or the left
so that the bolts (B) unlock on both sides.
• Hold the lever (A) in the turned position and
• glide the back along the row of holes (C) into
the desired position.
• Let go of the lever (A) so that both bolts (B)
can lock into place in the appropriate hole
(C).
ATTENTION
Make sure that after every back angle adjustment
both bolts are tightly locked in the hole.
(1)
(B)
(A)
(2)
(A) (B)
16

3.4.3 Folding the back down

To fold down for transport
• (3+4) remove the seat cushion and the back
• lower the back extension if necessary,
• place the push handle/s to the lowest
• turn the lever (A) to the right or the left so
To fold the back up again, proceed correspondingly.
(3)
(A)
(C)
(4)
(C)
cushion (or any other composition),
position (because of the Bowden cables for
tilting and drum brakes),
that the bolts (B) unlock and fold the back
forward.
(B)