Canon NP6012F Service Manual page 26

H. Using the Scanning Lamp
Heater Switch
If the site of installation is subject to low
temperature or the first time copy is subject
to a delay, make use of the scanning lamp
heater to prevent problems.
heater switch
Figure l-428
l-24
COPYRIGHT 0 199.5 CANONINC. CANON NP6012/NP6012FfNP6212 REV1 SEPT.1995 PAlNTEDINJAPAN(IYPRIMiAUJAPON)
I. Cleaning
If the images tend to be soiled or copy
paper tends to jam frequently, advise the
user to clean the following parts:
I '- 'I
.
1. If Images are Soiled
a. Copyboard Glass/Copyboard Cover
Wipe it with a moist cloth; then, dry wipe
it. If the dirt cannot be removed, wipe it with
a cloth moistened with mild detergent solu-
tion, and dry wipe it.
b.
1)
2)
3)
Cassette Pick-Up Roller
Remove the cassette.
Open the right cover.
Keep the separation pad down, wipe the
cassette pick-up roller with a cloth moist-
ened with alcohol or water* while rotat-
ing the roller in the direction of pick-up.
*Be sure to wring it well.
'
Cassette pick-up roller
,--_
Separation
pad
Figure l-429