MECHANICALSYSTEMI
3.
Removing the Pick-Up Clutch
1)
Remove the top cover. (See "Removing
the Top Cover.")
2)
Remove
the front
lower cover.
(See
"Removing the Front Lower Cover.")
3)
If the copier came with an ADF as stan-
dard, open the upper frame unit, and
remove the two screws 0 to remove the
sub hinge mount 0.
2.
1)
2)
,I
Removing the Pick-Up Roller
Remove the pick-up roller unit. (See "1.
Cassette Pick-Up Roller Unit.")
Remove the stdp ring (plastic) 0,
and
pull out the pickyup roller.
Figure 4-307
4)
If the copier came with an ADF as stan-
dard, remove the spring 0.
,-
,/
Figure 4-306
Figure 4-308
COPYRIGHT 0
1995 CANONINC.
CANON NP60121NP6012FINP6212
REV.1 SEP61995 PRlNTEOINJAPAN(IMPAIM~AUJAPON)
4 - 23