Canon NP6012F Service Manual page 154

3) Furthermore, put the longer side of wire
@ through under mirror 1 mount 0 and
hook it on the pulley @ of mirror 2 and 3
mount as shown in the figure below.
Figure 4-223
4) After hooking the longer side of wire 6)
on the pulley @ of mirror 2 and 3 mount,
route it through between mirror 1 mount
0 and scanning lamp 8.
Figure 4-224
5) Fish the rear end of the1 longer side of
wire @ through the hole 0 at the right
side face.
6)
Figure 4-225
Remove the fixing for the shorter side of
the wire @ and hook the wire on the pul-
ley @I at the right rear side as shown in
the figure below.
Figure 4-226
4-12
COPYRIGHT 0 1995 CANONINC.
CANON NP60121 NPMHZFI NP6212 REV.1 SEPT. 1995 PRINTED IN'JAPAN (IMPRIM~ AU JAPON)