Canon NP6012F Service Manual page 21

6.
1)
2)
ADF Cleaning Mode (NP6012/NP6212
only)
Place about 10 sheets of white copy
paper on the original tray of the ADF.
Operate so that 'U6' appears on the
count/ratio indicator; then, press the
Copy Start key.
l
The sheets of copy paper on the origi-
nal tray of the ADF will be picked up in
Figurel-412
3) To end user mode, press the AE key.
7. Installation/Drum Unit Replacement
Mode (U7)
*Only for a model with the drum unit
replacement time automatic indication func-
tion.
1) Operate so that 'U7' appears on the
count/ratio indicator; then, press the
Copy Start key.
l
The indication changes to '71'.
2) Using the +I- key, enter the value of
'PRIMARY' recorded on the drum unit.
l
Appears in the top left of the
count/ratio indicator while a value is
being entered.
Figure 1-414
3) After entering the value of 'PRIMRY',
press the Copy Start key to store the
value.
l
A press on the Copy Start key
changes the indication to '72'.
Figure l-415
Figure 1-413
COPYRIGHT 0 19% CANONINC. CANON NP60121NW012F/NP6212 REV.1 SEPT.1995 PRiNTEOtNJAPAN(IMPAIM~A'JJAPON)
l-19