_
2)
Rotate the wire drive pulley @ so that
the three pins @of the mirror positioning
tool for the rear and front side become
accommodated
in the position shown in
the figure below.
3)
Tighten the positioning screw at the rear
side and front side of mirror 1 mount 0.
Figure 4-234 (Rear side)
Figure 4-236 (Rear side)
.-._
Figure 4-237 (Front side)
~
Figure 4-235 (Front side)
COPYRIGHT 0
1995 CANONINC.
CANON NP6012/NPSQi2FINP6212
REV.1 SEPT.1995
PRlNTEDINJAPAN(IMPAIM~AUJAPON)
4-15
I