3.
Pick-Up Stationary Jam
If copy paper does not move past the registration sensbr because of a feeding problem, the
copier identifies a pick-up delay jam, stops copying operation, and flashes the Jam message.
(This detection is not executed in singlefeeder mode.)
Copy Start key
ON
4.
Delivery
Delay Jam
If copy paper does not reach the delivery sensor within:a specific period of time because of
a feeding problem, the copier identifies a delivery delay jam, stops copying operation,
and
flashes the Jam message.
Figure 3-424
5.
Delivery
Stationary
Jam
If copy paper does not reach the delivery sensor within a specific period of time because of
a feeding problem, the copier identifies a delivery stationary jam, stops copying operation, and
flashes the Jam message.
Figure 3-425
3 - 62
COPYRIGHT 0
1995 CANONINC.
CANON NP6012/NP6012F/NP6212
REV.1 SEPT.1995
PAlNTEDINJAPAN(IMPRIM~AUJAPON)