Canon NP6012F Service Manual page 185

6) Remove
the two screws @, and remove
the gear support plate @ from the rear.
Figure 4-612
7) Remove the two screws 8, and remove
the developing cylinder support plate 0
at the front.
8
Figure 4-613
8) Remove the gear @I), gear 8, bearing
8, and spacer 0; then, remove the
developing cylinder 0.
5.
a.
b.
C.
1)
Figure 4-614
Points to Note When'lnstalling the
Developing Cylinder
Clean the compartment in the develop-
ing assembly used to store the toner
cartridge.
Do not leave fingerprints or oils on the
surface of the developing cylinder. If
necessary, dry wipe the surface with lint-
free paper.
When installing the developing assembly
cover, perform the following:
Apply a thin coating of toner on the
blade 0 with a flannel cloth.
Figure 4-615
COPVRIGHT 0 1985 CANON INC CANON NPbWf WWF/NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPNMi AU JAPONJ
4 - 43