II. DRIVE SYSTEM
A. Scanner Drive Assembly
For instructions
on removing
the ADF,
see IX. "ADF."
1.
Removing the Scanner Drive Motor
1)
Remove the top cover. (See "Removing
the Top Cover")
2)
Loosen the two or three screws 0, and
remove the copyboard glass 0.
Figure 4-201
3)
Remove the four screws 0, and remove
the lens cover @.
Figure 4-202
COPYRIGHT 0
19115 CANONINC.
CANON NP6012/NP601ZF/NP6212
AEY.1 SEPT.1995
PRlMEDINJAPAN(lMPRIM~AUJAPON)
4-s
I
4)
5)
Remove
the Front Lower Cover. (See
"Removing the Front Lower Cover.")
If the copier came with an ADF as stan-
dard, open the upper frame unit, and
remove the two screws @to remove the
sub hinge mount 0.
Figure 4-203
6)
If the copier came with an ADF as stan-
dard, remove the spring 0.
Figure 4-204