Knife Holder E/E-Tc - Leica RM2125RTS Manual

5. Operation
5.9.9 Knife holder E/E-TC
The knife holder E-TC is designed
for the Leica TC-65 tungsten carbide
blades.
Knife holder E-TC
9
36
10
Fig. 29
Prior to inserting the blade, both knife
holder and knife holder base must
have been installed on the instrument!
Inserting the blade, knife holder E and E-TC
• Fold knife guard (9) downward.
• To insert the blade, flap the right clamping
lever (10) forward and down.
• Carefully insert the blade from the side.
Make sure that the blade is clamped parallel
to the upper edge of the pressure plate.
• To clamp the blade, rotate clamping lever
(10) back upwards.
Instructions for Use, V 2.1 – 10/2012