Operating Concept - Siemens Synco 700 Basic Documentation

General
Operating elements
Display examples
16/238
Building Technologies
HVAC Products
2.2.2

Operating concept

On the software side, all setting and readout values are arranged as datapoints of the
menu tree. Using the operating elements, every datapoint can be selected, displayed or
set. All menus appear on the LCD as clear text.
The controller has several languages preprogrammed; when commissioning the plant,
the required language is to be activated. The Operating Instructions for the enduser are
included with the controller; they contain the languages with which the controller is
supplied.
2
1
5
2
1
5
1 Display
2 INFO button
Function 1: Display of key plant data
Function 2: Display of information about the individual datapoints on the cur-
rent menu
3 OK select-and-press knob
Selection of operating line and adjustment of value
Turn:
Confirmation of operating line or setting
Press:
4 ESC button: Going back to the previous menu
5 Fault button with LED
Fault
LED:
Acknowledge or reset the fault
Press:
When one of the operating elements is used, the backlit display will automatically be
switched on. If there is no action for 30 minutes, the display is switched off and the start
page appears.
Start display:
Wednesday 15.11.2006
Welcome
Information
Main menu:
Setting level. Selection of a setting parameter,
e.g. on the "Main menu" of the user level:
Main menu:
Time switch
Room operating mode
Controller 1
Controller 2
Modular Heating Controller RMH760B
2 Operation
3
4
14:52
3
4
Plug-in type operator unit
RMZ790
Detached operator unit
RMZ791
CE1P3133en
05.02.2007