Technical Specifications; Power Supply Specifications; Copper Ethernet Port Specifications - Siemens RUGGEDCOM RMC40 Installation Manual
4-port unmanaged ethernet switch
Hide thumbs
Also See for RUGGEDCOM RMC40:
- Installation manual (28 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
RUGGEDCOM RMC40
Installation Guide
Technical Specifications
This section provides important technical specifications related to the device and available modules.
CONTENTS
•
Section 4.1, "Power Supply Specifications"
•
Section 4.2, "Copper Ethernet Port Specifications"
•
Section 4.3, "Fiber Optic Ethernet Port Specifications"
•
Section 4.4, "Supported Networking Standards"
•
Section 4.5, "Operating Environment"
•
Section 4.6, "Mechanical Specifications"
Section 4.1
Power Supply Specifications
Power Supply Type
24 VDC
48 VDC
b
HI
a
(T) denotes time-delay fuse.
b
This is the same power supply for both AC and DC.
Section 4.2
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RMC40.
c
Speed
Connector
c
Duplex
d
Cable Type
Power Supply Specifications
Minimum Input
Maximum Input
18 VDC
36 VDC
88 VDC
85 VAC
10/100Base-TX
RJ45
FDX/HDX
> CAT-5
Internal Fuse Rating
36 VDC
59 VDC
3.15A (T)
300 VDC
264 VAC
Chapter 4
Technical Specifications
Max. Power
a
Consumption
5 W
15
Advertisement
Table of Contents
