Miele CS 1212-1 Operating And Installation Instructions page 34

Safety instructions for installation
Clearances at the sides of the
appliance
If you are installing this appliance, there
may be a wall at the rear and a cabinet
or wall one one side. On the other side,
however, no unit or divider should stan-
d higher than the built-in appliance (see
illustrations).
Because of the high temperatures
radiated, there must be a minimum safe
clearance distance of 50 mm from the
worktop cut-out to the rear wall.
Between the worktop cut-out and the
surrounding furniture, e.g., an upper
cabinet to the right or left, the following
safety clearance a is to be maintained:
2" (50mm)
6" (150 mm)
10" (250 mm)
34
for CS 1112
CS 1122
CS 1212
CS 1212-1
CS 1221
CS 1223
CS 1326
CS 1327
for CS 1322
CS 1421
for CS 1012
CS 1012-1
CS 1028
Highly recommended!
not recommended
not permitted