Installing The Appliance(S) - Miele CS 1212-1 Operating And Installation Instructions

Installing the appliance(s)

^ Feed the appliance connection cable
down through the worktop cut-out.
^ Place the front edge of the appliance
into the countertop cut-out.
^ Using both hands, evenly press the
appliance downward, until it
noticeably clicks into place. Ensure
that the appliance seal is flush with
the worktop. Only in this way is an
effective seal all around guaranteed.
Do not use sealant!
^ Push the installed appliance to the
side until the slots in the support bar
are visible.
^ Insert the cover strip d into the slots
in the support bar b.
44
^ Place the front edge of the next
appliance into the countertop cut-out.
^ Connect the appliance(s) to the
power supply (see "Electrical
connection").
^ Check the appliance(s) for correct
operation.
The appliance can be lifted out using
a special tool.
You can also push the appliance up
and out from underneath. Note that
the rear will need to be pushed out
first.