Before using for the first time
Attach the data plate found in the
documents for your appliance in the
locations indicated in "Data Plate."
Clean the combiset
^ Remove any protective wrapping and
adhesive labels.
^ Before using for the first time, clean
the appliance with a damp cloth only
and then wipe dry.
12
Heat the appliance
When the combiset is first connected to
the power supply and after a power
failure, all indicators in the display will
light up for approx. 1 second. The
combiset can be used as normal once
the indicators go out.
When the appliance is used for the first
time, it may give off a slight smell and
some vapours. This smell will be less
noticeable with each subsequent use
before dissipating completely.
The smell and any vapours given off do
not indicate a faulty connection or
appliance and they are not hazardous
to health.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.