Auto-Heat - Miele CS 1212-1 Operating And Installation Instructions

Use

Auto-heat

When Auto-heat has been activated,
the burner switches on automatically at
the highest setting and then switches to
the continued power level which was
selected. The "heat-up" time depends
on which continued power level has
been chosen (see table).
Continued
power level*
1
2
3
4
5
6
7
8
9
The higher continued cooking settings
are generally used for frying, a short
heat-up time is needed to heat up the
pan initially.
Taking a pan off the burner while
Auto-heat is in operation interrupts the
function. It will resume if a pan is
placed back on the burner within
3 minutes.
18
Heat-up time
(approx.)
min : sec
0 : 15
0 : 15
0 : 25
0 : 50
2 : 00
5 : 50
2 : 50
2 : 50
-
Activating Auto-heat
^ Turn the control knob
counterclockwise as far as it will go
and hold until an A appears in the
display.
If you hold the knob for too long, L
will appear in the display which
means that the lock has been
activated (see "Child Saftey Lock).
^ Turn the control knob clockwise to
the desired continued power level.
Auto heat-up will not be activated if you
do not select a continued power level
within 5 seconds.
Once Auto-heat has been activated the
continued power level can be changed
within 10 seconds.
Changing the continued power level
after 10 seconds will deactivate the
Auto-heat function.
During the Auto-heat phase an A will
show in the display.