XBody Newave User Manual page 37

User Manual
Version: 1.7
The stimulation and the training time can be suspended by pressing the Pause button or stopped
anytime by pressing the Stop button which will end the training. When resuming the training after a
pause the video is started from the beginning of the current exercise. The Full screen button next to
the Back button makes the video appear in full screen mode which is helpful if the intensity
parameters of the electrodes are set. This way the trainee can focus better on the exercise itself.
Pressing the Full screen button again takes back to the small view with the stimulation controls. Note
that in this view the impulse parameters are preset and aligned to each of the videos. The two Arrow
buttons right to the stop button can be used to jump between the different programs within the
video. Also the elapsed and the total time of the video is displayed here to provide information on
the length of the video. The window can be left by pressing the Back button at the bottom left corner
of the screen.
Page: 36 / 47