Preparing For The First Use; Preparation Of The Machine For The First Use - XBody Newave User Manual

User Manual
Version: 1.7
4

Preparing for the first use

The following sections will guide you through the descriptions of the machine and the steps that
must be done in order to set up everything for the training.
4.1

Preparation of the machine for the first use

Note: The assembly preparation steps covered below can be reviewed at any time by accessing
www.xbodyworld.com/set-up/
The serial number of the device has to be given prior having access to the content. Available
languages are Hungarian, English and German.
Instruction manual to access the online guide
After unpacking and checking the accessories, limited assembly activities are required before one can
power-up the machine as described below.
The machine has to be assembled from two parts, the head and the standard leg. There are two
possible leg variants: the standard and port legs.
Page: 9 / 47