XBody Newave User Manual page 11

User Manual
Version: 1.7
The assembled machine with the standard leg
The machine assembled using the port leg should be placed on a table or a fixed stand. This is a
smaller leg variant.
The assembled machine with the port leg
For the first step the leg should be placed on solid ground right after unpacking. The head element is
installed on the leg as shown in the figure above. The power supply cable at the bottom of the leg
should be plugged into a wall outlet. In order to cut the power of the machine the power supply
cable should be disconnected from the wall outlet.
Page: 10 / 47