XBody Newave User Manual page 31

User Manual
Version: 1.7
A trainer shall start the training with setting the channel intensities to a moderate level in the
beginning of the training. Since the intensity can be increased during the stimulation period only, the
trainer shall prepare to do the increase during the stimulation period.
The stimulation can be stopped any time by pressing the Stop button and the training can be
continued by pressing the Start button again. If the client would like to train with multiple programs,
it is possible to navigate back to the Program selector window and choose another program. In this
case the training intensities are stored and moved between programs and the training session
continues with the new program. If the client spends at least 3 minutes with training in a training
session one training is automatically used from the active pass of the client.
The Reset button sets and the impulse parameters back to their default state depending on the
program and sets all the channel intensities to 0%.
During the training the stimulation parameters can be set by pressing the Impulse button at the
bottom of the screen.
Page: 30 / 47