XBody Newave User Manual page 24

User Manual
Version: 1.7
The window can be left by pressing the Back button at the bottom left corner of the screen.
5.2.2 The Trainer mode
After logging in with a trainer the Trainer mode is available and the Client selector window is shown.
You can use training mode in two different ways. You can use the Presentation mode, which is a free
mode of training designed to simplify the training process for presentation purposes. Presentation
mode is a built-in training mode, where you don't need to choose a client, so the usage of the
machine, including the programs and the training process, can be set-up more quickly since you don't
need to buy a pass for training and don't need to store client data. Please use the Presentation mode
only if it is necessary. The regular way of training is that after you login with a trainer a client is
trained with an active pass.
In training mode a client must be chosen before the training start. The left-hand side of this window
the registered clients are listed, while the right-hand side shows some information of the selected
client. There is an activity calendar that shows the trainings of the client. The dark green color marks
the training days. The light green color marks the next two days after a training indicating the long
term effect of EMS trainings. The yellow days (3-4 days after training) indicate that the client should
go to the next training. Finally, the red days indicate that the client has not gone off the efficiency
zone.
Page: 23 / 47