Residual Heat - AEG BS9314001 User Manual

Hide thumbs Also See for BS9314001:
Table of Contents

Advertisement

14
www.aeg.com
WARNING!
Do not put water directly into
the steam generator. Use only
water. Do not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put flammable
or alcoholic liquids into the
water drawer.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
3. Push the water drawer to its initial
position.
4. Activate the appliance.
5. Prepare the food in the correct
cookware.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function
Duration
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Let the appliance dry fully with the
door open.
10. Empty the water drawer after the
steam cooking is completed.
The appliance is hot. There is a risk of
burns. Be careful when you empty the
water drawer.
When the steam generator is
empty, an acoustic signal
sounds.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with
the door open.
7.6 Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
or End Time
.
7.7 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
seconds. The heat-up indicator
alternates.

7.8 Residual heat

When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
7.9 Energy saving
The appliance contains features which
help you save energy during everyday
cooking:
• Residual heat
– When the heating function or
programme operates, the heating
elements are deactivated 10%
earlier (the lamp and fan continue
to operate). For this feature to
operate, the cooking time must
be longer than 30 minutes or you
must use the clock functions
(Duration, End Time).
– When the appliance is off, you
can use the heat to keep food
warm. The display shows the
remaining temperature.
• Cooking with the lamp off - touch
and hold
for 3 seconds to
deactivate the lamp during cooking.
• Eco functions - refer to "Heating
Functions".
• When you use the function: Moist
Fan Baking, the lamp deactivates
after 30 seconds. The lamp activates
again when you touch
seconds or when you open the
appliance door.
• When you use the Eco functions, the
lamp deactivates. The lamp activates
again when you touch
seconds or when you open the
appliance door.
for 3
for 3
for 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bs9304001

Table of Contents