Table of Contents
Advertisement
8. CLOCK FUNCTIONS
8.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 % of
the set time. The appliance
uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
Minute Minder
Duration
End Time
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Press
to activate the function. Use the
shuttle to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating func-
tion (max. 23 h 59 min).
8.2 Setting the clock functions
• Before you use the
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
• You can use the functions:
Duration and End Time at
the same time if you want
to automatically activate
and deactivate the
appliance on a given time
later.
• The functions: Duration
and End Time do not work
when you use the Core
Temperature Sensor.
1. Set a heating function.
2. Press
again and again until the
display shows the necessary clock
function and the related symbol.
3. Use the shuttle to set the necessary
time.
4. Press
to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the
signal.
ENGLISH
15
to start.
Advertisement
Table of Contents
