Focus; Capture And Save Images; Digital Zoom - Fluke TiX870 User Manual

Focus

Correct focus makes sure that the infrared energy is correctly directed onto the pixels of the detector.
Without correct focus, the thermal image can be blurry, and the radiometric data may be inaccurate.
To focus with the advanced manual focus system, rotate the Manual Focus Control (f in
until the object is in proper focus.

Capture and Save Images

To capture an image:
1. Aim the Imager at the target and focus on it.
2. Push and release
and you can save or edit the image.
To edit an image, see
3. Push again to save the image.
To take thermal images in different modes, see
Capture Mode. To take non-radiometric videos, see

Digital Zoom

Use the Digital Zoom function to enlarge/shrink the live image or the thermal image being viewed.
In the image display area:
•
Enlarge: Tap the screen with two fingers and spread them outward.
•
Shrink: Tap the screen with two fingers and pinch them together.
•
You can also slide the wheel at the bottom of the screen to enlarge/shrink.
In Live View mode, a digital zoom factor shows at the bottom of the screen, see
to capture and freeze the image. The image is saved in the memory buffer,
Thermal Image/Video
View
Analysis.
Mode. To take fully-radiometric videos, see
Non-Radiometric Videos.
Thermal Imagers
Basic Operation
Figure 2)
Figure 11.
21