Programming Operation; Lease Function - Leixen VV898 User Manual

RES", press "CHA+/CHA-NOL+NOL-" or pressing
Up/Down key of microphone to go to "Menu l/FUN
RES". After press M key screen shows "RESET?",
press M key again to confirm, the radio shows
"WAITING" and then restart, that means the radio has
been Function reset successful. You can cancel
Function reset by press any key when screen shows
"RESET?".
Programming Operation
Lease Function
Lease function is used to define the use time of radio.
The radio would suddenly stop working when lease
time out. The indicator flashing red sustained, user
can do nothing except turn the radio off. The radio can
just restart through programming by software. Lease
function can only set by program software.
Remaining time: User can set whether to indicate
remaining of lease time or not. If the optional is
checked, and open display set as lease time, remaining
time would be displayed on screen when the radio
opened.
Lease Time: User can set radio's lease time through
program software. Range: 1 minute -255 days 24
hours 59 minutes.
43
Wireless Change Frequency
Wireless change frequency is used to programming
channels of radios which are using by wireless, which
make user apart from troubles to recall radios in use.
This function can only set through program software.
Example: A team bought 10 radios, one of them used
by administrator, the others installed in nine cars for
use. Administrator wants to create a new channel for
communicate, he can wireless change frequency
without recall radios in use, or program one by one.
Refer to details as following:
1, Administrator should enable "Wireless change
frequency" function of the ten radios, and set a 1-15
digit activation code in advance (Range: 0-9, AD,
*
or
#).
2, Program one of PI, P2, P3 or M shortcut key as
"OFF", so that the shortcut is available to use when
"Wireless change frequency" been set.
3,
The radio which used by administrator should be
programmed as "master" radio, and fitted a DTMF
microphone.
4,
Administrator stores frequency which wants to be
used in the 1-199 channel list of "master" radio.
5, When everything ready, user can wireless change
frequency manually or automatically:
44