Leixen VV898 User Manual page 12

Group ID: You can use DTMF character "A", "B",
"C", "D",
"*"
or "#" to set up a group call "universal
character." If the radio receives a valid ID code, which
one to all digital is replaced by this "universal
character" group call code, then the radio will decode.
Group call which using "Group call code" is effect in
"Monitor Lock" or selected call. The radio which is
called by group call can't do an automatic respond.
(Default group is A)
I S
10
di
fill
F
orexampe: et
ra
10S
as
0
ows:
Item Individual
ID
Unite
ID
Group ID.
Radio 1 80811
C
Group 1
Radio 2 80812 C Group 1
Radio 3 80813
C
Group 1
Radio 4 80814 C Group 1
Radio 5 80815 C Group 1
Radio 6 80831
C
Group 3
Radio 7 80832 C Group 3
15
Radio 8 80833 C
Group 3
Radio 9 80834 C
Group 3
RadiolO
80835 C Group 3
Send the ID code: 80814 to call "RadIO 4".
Send the ID code: 80832 to call "Radio 7".
Send the ID code: 8081 C to call all radios in Group 1.
Send the ID code:
8083C
to call all radios in Group 3
Send the ID code:
808CC
to call all radios in Group 1
and Group 3 which are both in Unite C.
<}
DTMF code transmission mode:
1, Automatic transmission: Fill in the DTMF call list
in the software to make a fast dialed call. In VFO /
MR / CH mode, keep DTMF open, press the CALL
key (A key) + a serial number of list by microphone
and then press
PIT
to send the DTMF code. (Note:
No. 0-9 can be entered or press UP / DOWN keys on
microphone directly or press
"CHA+/CHA-NOL+NOL-" to select, number 10-15
can only press UP / DOWN button on microphone or
press "CHA+/CHA-NOL+NOL-" to select.
2, Manual transmission: If the DTMF list in software
is empty, the radio would close CALL function when
16